MMS-1 Mini Miter Square

MMS-1 Mini Miter SquareThe MMS 1 Mini Miter Square is a small square that is precisely machined from anodized aluminum, which won't rust. It is designed to be small enough to fit in an apron pocket. The adjustable nickel plated steel foot is attached to the square via 3 rare earth magnets and allows a miter angle to be checked in both directions by flushing the square up to the edges of the stock using the foot. It is ideal for checking squareness between the blade and

these Richter butt chisels feature short

The Shapton Diamond Glass Lapping Plate (DGLP) is constructed from a substrate of glass coated with diamonds embedded in a nickel coating

as it has the ability to smooth any difficult wood after it has been milled by hand tool or machine

1 mm and arm length of 27 mm

The size range of the diamond abrasive used in this plate is 45µm to 54µm (270/325 mesh)

The deluxe version is made of heavier leather

69") x 40 mm wide x 8 mm deep straight edge is made from stainless steel that is carefully stress relieved before grinding and lapping to ensure that it is dimensionally stable over time and with changing ambient temperature

The blade is mounted in the handle using a solid stainless steel ferrule and there is a leather washer added to help absorb shocks from mallet blows

The blades are accurately ground and have a slimmer cross section with lands (edges) of about 1 mm

If using your vise a lot

which is the thickness used for both Veritas and Lie Nielsen bevel-up bench planes - if you are using thicker or thinner plane blades

They have a thin lacquer coating applied for rasp protection