HNT Gordon Small Curved Sole Spoke shave

HNT Gordon Small Curved Sole Spoke shaveThis gidgee small curved sole Spoke Shave has a 10mm radius (3 8") and is 235 long x 12mm wide x 12mm high. Weighs 90 grams and has a 19mm wide x 1. 2mm thick x 25mm long Tool Steel (TS) blade hardened to Rc 62 64 OR a High Speed Steel (HSS) blade hardened to Rc 62. The HSS is ideal if you plan to reverse the blade to bevel up and use it as a scraper on hard timber. The plane (when used with the blade bevel down) has a 60 degrees blade pitch for

1/2" (13mm)

The blade edges are ground with acute 35 degree angles to provide excellent clearance into the tight corners of dovetails

Because Alfie Shine is only made from waxes and resins

Bevels are ground at a 25 degree angle

Extra care is taken during grinding and polishing to ensure that the back of the chisel is very flat and that the sides taper down to very thin lands which allow the chisel to be used in very tight spaces such as when cutting dovetails

0008" over their length

06") diameter body is machined from solid brass and includes metric cm scale markings indicating the circle diameter as the iris aperture size is adjusted by rotating one part of the body

The 4007-02-120 45° Try Square has a base that this 20 mm wide x 5 mm thick x 80 mm long and a blade that is 20 mm wide  x 5 mm thick x 120 mm long and its stable base makes it ideal for machine set ups such as accurately setting the angle of a table saw blade for miter cuts

The blade is 3 7/8” long x 2” wide x 1/4” thick

However when using the upper blade clamp to sharpen plane blades (and any other honing jig where the front/front of the blade/iron is the registration surface)

The HNT Gordon tilting vice jaw is designed to enhance your pattern makers or front vice

Narex Chisels are made in the Czech Republic and are an exceptional value for the price