2.5" OD X 24" Long

2.5" OD X 24" LongStandard aluminum intake tubing. 6061T6 alloy . 065 wall thickness. Cuts easily with a hack saw. About 1 1 2 inches on each end goes inside an intake hose (minimum 1 inch). Mill finish (as it arrives at our location from the mill) may have minor defects and small scratches, but no dents or major defects. Made in USA.

This is the special version to fit most one-barrel carburetors (straight part on top of carb must be long enough to clamp elbow on securely)

90HL4590L45

There is no other way to make a really tight bend without losing air flow

This reducing insert adapts a 7" ID intake hose to a 6-1/4" OD tube

This 90 degree silicone elbow is 2-1/2" ID it handles 500 F continuous and is perfect for intercooler/aftercooler applications

This 3" silicone coupler is 6 inches long

Recommended clamps are 94100-0600 on the small end and 94100-0750 on the big end

Use a cobra head anywhere a standard or short-radius elbow will not fit

This reducing insert adapts a 8" ID intake hose to a 6" OD tube

regardless of the expansion and contraction caused by changes in temperature and pressure

100R80 10H8

Recommended clamps are 94100-0600 on the small end and 94100-0850 on the big end