Pressure Gauge

Pressure Gauge0 300 PSI Pressure gauge with 7 feet of hose. 1 8 NPT 90 degree pipe fitting screws into the pressure port on GM automatic overdrives. This gauge is used during the setup of these transmissions. Once setup is complete it can be removed.

· Re-calibrated pressure curve for quicker pressure response off idle

These early engines did not have the bolt bosses cast into the sides of the block where modern style rubber engine mounts are attached

These B&M converter lockup controls provide dash-mounted control to govern converter lockup at any speed between 30 and 90 mph

This pan is also available in standard depth and capacity for the same price

the actual cable pull distance becomes less and less

This bracket was designed to work with our Patented TV Made EZ system only

The shifter (whether used original or new reproduction) will need to be modified by us to allow access to all the needed seven shift positions

Since we want to give our customers the best

The stock shifter will need to be modified at our shop then this modified shifter will mount directly to our custom bracket in the exact stock hole location

click here

This kit will complete the lock up system of the torque converter

new frictions