Narex 3/4" Premium Dovetail Chisel

Narex 3/4" Premium Dovetail ChiselNarex Chisels are made in the Czech Republic and are an exceptional value for the price. The blades are made from fine grained, chrome manganese steel and hardened to Rc 59, and hold an excellent edge. This chisel has a width of 3 4". The blade edges are ground with acute 35 degree angles to provide excellent clearance into the tight corners of dovetails. The primary bevels are ground at 25 degrees. Blades are 5 inches long and have a hollow on the

The table below shows the angle correction required at different target angles for blades of various thicknesses including Old Stanley (about 0

The size range of the diamond abrasive used in this plate is 45µm to 54µm (270/325 mesh)

They are about 200 mm (8") in length and all have a No

1:6  1:7 1:8 and 60 mm (2

The head is 1" square

9 kgTHREAD: 6 TPI ACME for fast

These have a light coating of oil - we recommend applying a light coating of oil after use

It is applied in thin coats using a soft cloth

which can be left on or removed with paint thinner

It is supplied with one solid brass dog that is 6 mm (1/4") high for low profile work

The tilting jaw can be used in the back jaw of the pattern makers vice

v=NGWHT7Q9WtA)