3.5" OD X 48" Long

3.5" OD X 48" LongStandard aluminum intake tubing. 6063T52 alloy . 065 wall thickness. Cuts easily with a hack saw. About 1 1 2 inches on each end goes inside an intake hose (minimum 1 inch). Mill finish (as it arrives at our location from the mill after traveling on a truck and being handled several times) may have minor defects and small scratches, but no dents or major defects. Made in USA.

Special 4" leg lengths

Has reinforcing ribs for added strength

This reducing insert adapts a 7" ID intake hose to a 6-1/4" OD tube

It will handle 350 F continuous

This 2" ID silicone coupler is 3 inches long and has the special matte red finish indicating aramid reinforcement

6063T6 alloy

This standard 8 inch hump hose is used to connect two 8" OD intake tubes

Recommended clamps are 94100-0450 on the small end and 94100-0550 on the big end

065 wall thickness

This 3-1/2" ID high temp silicone hump is useful in any application that requires a high heat resistance

Recommended clamps are 94100-0750

This 2-3/4" ID high-temp silicone hump hose is useful in any application that requires a high heat resistance