PSM Swaybar endlinks for Limit Break swaybar on front or rear lower arms

PSM Swaybar endlinks for Limit Break swaybar on front or rear lower armsParts Shop Max Swaybar endlinks for Limit Break swaybar on front or rear lower arms Listing is for: 1x Pair of swaybar links Connect The MAX Limit Break front or rear swaybars to the OEM front or rear lower control arms. Includes aluminum bracket that attaches through OEM swaybar mounting holes on the arms and converts to our spherical bearing endlink. Includes Sway Bar Links, Removable Clevis, and hardware set with high misalignment spacers. Allows

Compliment the 70 degrees of backside clearance provided by the huge OTR joint notch by pairing this arm with our parallel steering clearanced tension rod for OEM type FLCA's

FIXING: Boot side

Tilton 800-Series 2-pedal floor mount pedal assembly merges the performance of 900-Series pedal assembly technology and the renowned value of 600-Series pedal assemblies

Usefull when our classic extended inners are still not long enough to reach the knuckles

loaded with pads & pad related hardware

Prevent your 25mm diameter swaybar from sliding side to side in the bushings

1 x Nuke Performance CFC Unit - low profile version

and with this hose kit for 8 BAR (120 PSI) air compressors you get everything you need for a 2

thread AN-8 ORB

*Unless you grind a 27mm wrench down to 5mm width its pretty hard to get the solenoid off so we spot welded the housing to the base and then its removed pretty easily by turning the housing thats normally free to spin

for any need between 200 - 2000hp

This Fernando Alonso edition version includes a 2mm multi layer light smoke blue visor